74LVC1G74GD-Q100H Overview

The package is in the form of 8-XFDFN. It is included in the package Tape & Reel (TR). T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. A frequency of 200MHzshould be the maximum output frequency. This process consumes 40μA quiescents. If you search by 74LVC1G74, you will find similar parts. A JK flip flop with a 4pFfarad input capacitance is used here. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 8 pins. This device's clock edge trigger type is Positive Edge. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes 10μA of quiescent current without being affected by external factors.

74LVC1G74GD-Q100H Features

Tape & Reel (TR) package
74LVC series
8 pins

74LVC1G74GD-Q100H Applications

There are a lot of Nexperia USA Inc. 74LVC1G74GD-Q100H Flip Flops applications.

• Modulo – n – counter
• Consumer
• Set-reset capability
• Asynchronous counter
• Patented noise
• Bounce elimination switch
• Data Synchronizers
• 2 – Bit synchronous counter
• Data transfer
• Shift registers