74LVC273D,112 Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis required for its operation. A temperature of -40°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It belongs to the 74LVCseries of FPGAs. It should not exceed 230MHzin terms of its output frequency. D latch consists of 1 elements. Terminations are 20. JK flip flop belongs to 74LVC273 family. It is powered from a supply voltage of 1.8V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the LVC/LCX/Zfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. It is designed with 8bits. In this case, the maximum supply voltage (Vsup) reaches 3.6V. A total of 8input lines have been provided. Quiescent current is consumed by the D latch in the amount of 10μA.

74LVC273D,112 Features

Tube package
74LVC series
20 pins
8 Bits

74LVC273D,112 Applications

There are a lot of Nexperia USA Inc. 74LVC273D,112 Flip Flops applications.

• Dynamic threshold performance
• Count Modes
• Communications
• Bounce elimination switch
• Storage registers
• Guaranteed simultaneous switching noise level
• Buffered Clock
• EMI reduction circuitry
• Differential Individual
• Shift Registers