74LVC2G74DC-Q100H Overview

The flip flop is packaged in a case of 8-VFSOP (0.091, 2.30mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~5.5V. -40°C~125°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. It should not exceed 200MHzin its output frequency. In total, it contains 1 elements. Currently, there are 8 terminations. The 74LVC2G74 family contains it. The D flip flop is powered by a voltage of 1.8V . JK flip flop input capacitance is 4pF farads. A device of this type belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with a number of bits of 1. There is a 5.5Vmaximum supply voltage (Vsup). In terms of quiescent current, it consumes 40μA .

74LVC2G74DC-Q100H Features

Tape & Reel (TR) package
74LVC series
1 Bits

74LVC2G74DC-Q100H Applications

There are a lot of Nexperia USA Inc. 74LVC2G74DC-Q100H Flip Flops applications.

• Parallel data storage
• Guaranteed simultaneous switching noise level
• Test & Measurement
• Storage registers
• Single Down Count-Control Line
• Frequency Divider circuits
• Buffer registers
• Instrumentation
• Consumer
• Shift Registers