74ABT16823ADGG,112 Overview

The package is in the form of 56-TFSOP (0.240, 6.10mm Width). A package named Tubeincludes it. As configured, the output uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. This D flip flop should not have a frequency greater than 190MHz. The list contains 2 elements. There is a consumption of 1mAof quiescent energy. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ABT16823 family contains this object. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 4pFfarad input capacitance. ABTis the family of this D flip flop. The part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. The power supply is 5V. The flip flop has 2ports embedded within it. Additionally, there are WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.

74ABT16823ADGG,112 Features

Tube package
74ABT series
5V power supplies

74ABT16823ADGG,112 Applications

There are a lot of NXP USA Inc. 74ABT16823ADGG,112 Flip Flops applications.

• Balanced 24 mA output drivers
• Modulo – n – counter
• Safety Clamp
• QML qualified product
• CMOS Process
• Registers
• Computing
• 2 – Bit synchronous counter
• Frequency Divider circuits
• Communications