SN74ALS577ANSRG4 Overview
24-SOIC (0.209, 5.30mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. Tri-State, Invertedis the output configured for it. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to 0°C~70°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74ALSseries of FPGAs. There should be no greater frequency than 30MHzon its output. The element count is 1 . This process consumes 18mA quiescents. There are 24 terminations,Members of the 74ALS577family make up this object. A voltage of 5V is used to power it. In this case, the D flip flop belongs to the ALSfamily. A part of the electronic system is mounted in the way of Surface Mount. The 24pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 8bits. There is a 5.5Vmaximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. There are 2 ports embedded in the flip flops. 8input lines are available for you to choose from.
SN74ALS577ANSRG4 Features
Tape & Reel (TR) package
74ALS series
24 pins
8 Bits
5V power supplies
SN74ALS577ANSRG4 Applications
There are a lot of Texas Instruments SN74ALS577ANSRG4 Flip Flops applications.
- Memory
- Balanced 24 mA output drivers
- Buffer registers
- Patented noise
- Synchronous counter
- Safety Clamp
- Functionally equivalent to the MC10/100EL29
- Single Up Count-Control Line
- Registers
- Circuit Design
