74ABT16823ADGG,118 Overview

The item is packaged in 56-TFSOP (0.240, 6.10mm Width)cases. Package Tape & Reel (TR)embeds it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. It should not exceed 190MHzin terms of its output frequency. D latch consists of 2 elements. Despite external influences, it consumes 1mAof quiescent current. There are 56 terminations,If you search by 74ABT16823, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 4pF farads. In this case, the D flip flop belongs to the ABTfamily. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.5V. The D flip flop has no ports embedded. Furthermore, it has WITH CLEAR AND CLOCK ENABLEas a characteristic.

74ABT16823ADGG,118 Features

Tape & Reel (TR) package
74ABT series

74ABT16823ADGG,118 Applications

There are a lot of NXP USA Inc. 74ABT16823ADGG,118 Flip Flops applications.

• Synchronous counter
• ESCC
• Matched Rise and Fall
• Balanced Propagation Delays
• Storage registers
• Convert a momentary switch to a toggle switch
• Communications
• Reduced system switching noise
• Power down protection
• Divide a clock signal by 2 or 4