SN74ABT534APWRG4 Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Tri-State, Invertedoutput configured with it. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ABTseries of FPGAs. This D flip flop should not have a frequency greater than 175MHz. D latch consists of 1 elements. T flip flop consumes 250μA quiescent energy. A total of 20terminations have been recorded. D latch belongs to the 74ABT534 family. It is powered by a voltage of 5V . Its input capacitance is 3.5pFfarads. Devices in the ABTfamily are electronic devices. Surface Mount mounts this electronic component. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Its superior flexibility is attributed to its use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. The supply voltage should be maintained at 5V for high efficiency. The output current of 64mA makes it feature maximum design flexibility.

SN74ABT534APWRG4 Features

Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT534APWRG4 Applications

There are a lot of Texas Instruments SN74ABT534APWRG4 Flip Flops applications.

• Shift registers
• Digital electronics systems
• Functionally equivalent to the MC10/100EL29
• Data transfer
• Automotive
• Safety Clamp
• Instrumentation
• Bounce elimination switch
• Communications
• Counters