74HCT107N,652 Overview

The flip flop is packaged in 14-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. As configured, the output uses Differential. This trigger uses the value Negative Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type JK Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 66MHzin its output frequency. D latch consists of 2 elements. It consumes 4μA of quiescent current without being affected by external factors. A total of 14terminations have been recorded. JK flip flop belongs to 74HCT107 family. Power is supplied from a voltage of 5V volts. Its input capacitance is 3.5pF farads. A device of this type belongs to the family of HCT. This RS flip flops is a part number FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 4.5V. The power supply is 5V.

74HCT107N,652 Features

Tube package
74HCT series
5V power supplies

74HCT107N,652 Applications

There are a lot of NXP USA Inc. 74HCT107N,652 Flip Flops applications.

• Asynchronous counter
• EMI reduction circuitry
• Divide a clock signal by 2 or 4
• Data Synchronizers
• Counters
• Single Down Count-Control Line
• High Performance Logic for test systems
• Reduced system switching noise
• Supports Live Insertion
• Memory