100331QI Overview

As a result, it is packaged as 28-LCC (J-Lead). D flip flop is included in the Tubepackage. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. A -4.2V~-5.7Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TC. Logic flip flops of this type are classified as D-Type. There should be no greater frequency than 400MHzon its output. In 28terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 100331family includes it. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 28 pins. The clock edge trigger type for this device is Positive Edge. The superior flexibility of this product is achieved by using 3 circuits. Currently, there are 5 input lines present. In addition, you can refer to the additinal WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS of the D latch. High level output current is set to 50mA. In the low level output current setting, the current is set to 50mA.

100331QI Features

Tube package
28 pins

100331QI Applications

There are a lot of ON Semiconductor 100331QI Flip Flops applications.

• Data transfer
• Storage registers
• Power down protection
• ATE
• Reduced system switching noise
• Single Down Count-Control Line
• Set-reset capability
• Shift registers
• Shift Registers
• High Performance Logic for test systems