74LVT16374MTD Overview

In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. You can find it in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at a voltage of 2.7V~3.6V. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. JK flip flop is a part of the 74LVTseries of FPGAs. Its output frequency should not exceed 160MHz. A total of 2elements are present in it. It consumes 190μA of quiescent There are 48 terminations,It is a member of the 74LVT16374 family. A voltage of 3.3V is used as the power supply for this D latch. Input capacitance of this device is 4pF farads. The electronic device belongs to the LVTfamily. There is an electronic component mounted in the way of Surface Mount. The 48pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). There are 2 ports embedded in the flip flops. If high efficiency is desired, the supply voltage should be kept at 3.3V. With an output current of 64mA, this device offers maximum design flexibility. It operates with 16 output lines.

74LVT16374MTD Features

Tube package
74LVT series
48 pins

74LVT16374MTD Applications

There are a lot of ON Semiconductor 74LVT16374MTD Flip Flops applications.

• Buffer registers
• Bounce elimination switch
• CMOS Process
• Guaranteed simultaneous switching noise level
• Memory
• ESD performance
• Matched Rise and Fall
• Computing
• Control circuits
• Modulo – n – counter