74LVX273SJ Overview

In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. The Tubepackage contains it. T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~3.6V volts. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74LVXseries contain this type of chip. A frequency of 90MHzshould be the maximum output frequency. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. There have been 20 terminations. You can search similar parts based on 74LVX273. The D flip flop is powered by a voltage of 2.7V . There is 4pF input capacitance for this T flip flop. An electronic device belonging to the family LV/LV-A/LVX/Hcan be found here. Surface Mount mounts this electronic component. A total of 20pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. An electronic part with 1bits has been designed. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. 8 circuits are used to achieve its superior flexibility. This input has 3lines in it.

74LVX273SJ Features

Tube package
74LVX series
20 pins
1 Bits

74LVX273SJ Applications

There are a lot of ON Semiconductor 74LVX273SJ Flip Flops applications.

• Balanced Propagation Delays
• Set-reset capability
• Memory
• Registers
• Storage registers
• Single Up Count-Control Line
• Asynchronous counter
• Balanced 24 mA output drivers
• Dynamic threshold performance
• Automotive