74VHCT574AMTC Overview

It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. You can find it in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 74VHCTseries of FPGAs. A frequency of 130MHzshould be the maximum output frequency. A total of 1elements are contained within it. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74VHCT574 family. The power supply voltage is 5V. Its input capacitance is 4pF farads. Devices in the AHCT/VHCTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 8bits. This D flip flop is well suited for RAIL based on its reliable performance. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. If high efficiency is desired, the supply voltage should be kept at 5V. There is 4μA quiescent current consumption by it. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 374. A total of 8 channels are available.

74VHCT574AMTC Features

Tube package
74VHCT series
20 pins
8 Bits
5V power supplies

74VHCT574AMTC Applications

There are a lot of ON Semiconductor 74VHCT574AMTC Flip Flops applications.

• Cold spare funcion
• Control circuits
• Automotive
• Bounce elimination switch
• Shift registers
• Counters
• Modulo – n – counter
• Synchronous counter
• Asynchronous counter
• Dynamic threshold performance