MM74HCT574SJX Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. This type of FPGA is a part of the 74HCT series. In order for it to function properly, its output frequency should not exceed 33MHz. A total of 1elements are contained within it. Terminations are 20. It is a member of the 74HCT574 family. A voltage of 5V is used to power it. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HCT. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It runs on 5Vvolts of power. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 3output lines. Despite external influences, it consumes 8μAof quiescent current. Currently, there are 8 channels available.
MM74HCT574SJX Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT574SJX Applications
There are a lot of ON Semiconductor MM74HCT574SJX Flip Flops applications.
- Safety Clamp
- Automotive
- Computers
- Latch-up performance
- Storage registers
- Power down protection
- Latch
- QML qualified product
- Communications
- Digital electronics systems
