DM74ALS576AWM Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. D flip flop is included in the Tubepackage. This output is configured with Tri-State, Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. It belongs to the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 30MHz. A total of 1elements are present in it. During its operation, it consumes 18mA quiescent energy. The 74ALS576 family contains this object. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is designed with a number of bits of 8. The superior flexibility is achieved through the use of 8 circuits. For high efficiency, the supply voltage should be set to 5V. It has 3 output lines to operate. It has 8lines. There is -2.6mA output current at the high level. There is no low level output current set at 24mA. A temperature below 70°Cshould be used for operation. A temperature above 0°Cshould be used for the operation. Despite its minimal supply voltage of 4.5V, it is capable of operating. It is capable of supporting a maximum supply voltage of 5.5V. This frequency can be achieved at 30MHz.

DM74ALS576AWM Features

Tube package
74ALS series
20 pins
8 Bits

DM74ALS576AWM Applications

There are a lot of ON Semiconductor DM74ALS576AWM Flip Flops applications.

• Convert a momentary switch to a toggle switch
• Divide a clock signal by 2 or 4
• Latch
• Circuit Design
• CMOS Process
• Single Down Count-Control Line
• Reduced system switching noise
• Shift Registers
• Common Clocks
• Data Synchronizers