MC10E131FNG Overview

The flip flop is packaged in a case of 28-LCC (J-Lead). Package Tubeembeds it. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of -4.2V~-5.7V volts, it operates. In this case, the operating temperature is 0°C~85°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 10E series. It should not exceed 1.4GHzin its output frequency. The element count is 1 . 28terminations have occurred. This D latch belongs to the family of 10E131. A voltage of 5V provides power to the D latch. In this case, the D flip flop belongs to the 10Efamily. Electronic part Surface Mountis mounted in the way. There are 28pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 4bits are used in this part. As soon as 5.7Vis reached, Vsup reaches its maximum value. A total of -5.2V power supplies are needed to run it. The 50mA output current allows it to be designed with the greatest amount of flexibility. The number of input lines is 4.

MC10E131FNG Features

Tube package
10E series
28 pins
4 Bits
-5.2V power supplies

MC10E131FNG Applications

There are a lot of ON Semiconductor MC10E131FNG Flip Flops applications.

• Matched Rise and Fall
• Shift Registers
• Common Clocks
• Event Detectors
• Asynchronous counter
• ESCC
• Latch
• Functionally equivalent to the MC10/100EL29
• Counters
• Digital electronics systems