MC100EP29DTR2G Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. As configured, the output uses Differential. There is a trigger configured with Positive, Negative. Surface Mountis positioned in the way of this electronic part. A supply voltage of -3V~-5.5V is required for operation. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 100EP series. Its output frequency should not exceed 3GHz Hz. It consumes 57mA of quiescent current without being affected by external factors. The number of terminations is 20. The 100EP29family includes it. Power is supplied from a voltage of 3.3V volts. Surface Mount mounts this electronic component. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. Using 2 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. In order for the device to operate, it requires -4.5V power supplies. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vas a characteristic. A -50mAis set for the high level output current. 50mA is the low level output current.

MC100EP29DTR2G Features

Tape & Reel (TR) package
100EP series
20 pins
-4.5V power supplies

MC100EP29DTR2G Applications

There are a lot of ON Semiconductor MC100EP29DTR2G Flip Flops applications.

• Count Modes
• Event Detectors
• Asynchronous counter
• Automotive
• Balanced Propagation Delays
• Frequency Dividers
• Differential Individual
• Data transfer
• Shift Registers
• Common Clocks