CD74HC174M96 Overview

As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. There is a Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. The 74HCseries comprises this type of FPGA. It should not exceed 35MHzin terms of its output frequency. The element count is 1 . There have been 16 terminations. The 74HC174family includes it. A voltage of 4.5V provides power to the D latch. There is 10pF input capacitance for this T flip flop. Electronic devices of this type belong to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. 16pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 6 Bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. To achieve this superior flexibility, 7 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The output current of 5.2mA makes it feature maximum design flexibility. There are no output lines on the JK flip flop. It consumes 8μA current. Additionally, it is characterized by DUMMY VAL.

CD74HC174M96 Features

Tape & Reel (TR) package
74HC series
16 pins
6 Bits

CD74HC174M96 Applications

There are a lot of Texas Instruments CD74HC174M96 Flip Flops applications.

• Frequency Dividers
• Patented noise
• Shift Registers
• Frequency division
• Functionally equivalent to the MC10/100EL29
• Data Synchronizers
• Matched Rise and Fall
• Safety Clamp
• Single Down Count-Control Line
• Test & Measurement