MC10EP31DR2 Overview

In the form of 8-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Tape & Reel (TR). In the configuration, Differentialis used as the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of -3V~-5.5V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. The 10EPseries comprises this type of FPGA. Its output frequency should not exceed 3GHz Hz. As a result, it consumes 45mA of quiescent current without being affected by external factors. 8terminations have occurred. The object belongs to the 10EP31 family. A voltage of 3.3V provides power to the D latch. In this case, the D flip flop belongs to the 10Efamily. It is mounted in the way of Surface Mount. It is designed with 8 pins. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. 1bits are used in its design. There is a 5.5Vmaximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. The superior flexibility of this circuit is achieved by using 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It operates from -5.2V power supplies. Additionally, it is characterized by NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V. There is 50mA output current at the high level. There is 50mA output current at the low level.

MC10EP31DR2 Features

Tape & Reel (TR) package
10EP series
8 pins
1 Bits
-5.2V power supplies

MC10EP31DR2 Applications

There are a lot of ON Semiconductor MC10EP31DR2 Flip Flops applications.

• Patented noise
• Data Synchronizers
• Latch-up performance
• Buffer registers
• Storage Registers
• Dynamic threshold performance
• Data transfer
• Latch
• Clock pulse
• Matched Rise and Fall