MC14551BDG Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. An electrical component of this type can be found in the 16 series. A SPDT switching circuit is used for these analog switches. Try searching for the analog switch ic with MC14551B if you are looking for variants. A 1.05kOhm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. Dual supply type digital switch with a low cost. 3V should be the lowest voltage fed to the electronic component. 360nA current would be enough for this multiplexer to operate. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating 8 inputs is required. It is possible to transfer data over a 17MHz-bandwidth.

MC14551BDG Features

2 Channels
Switch Circuit: SPDT
360nA Supply Current
Bandwidth: 17MHz

MC14551BDG Applications

There are a lot of ON Semiconductor MC14551BDG Analog Switches & Multiplexers ICs applications.

• Imaging
• Private Branch Exchange (PBX)
• E1 Network Equipment
• Remote Powered Equipment
• High-Voltage
• DVD-R
• Voice over IP/DSL – Integrated Access Devices, Smart
• T1/E1 Terminals
• SDH
• Sample-and-hold systems