MC74AC574NG Overview

20-DIP (0.300, 7.62mm)is the packaging method. Package Tubeembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AC series. It should not exceed 95MHzin its output frequency. The element count is 1 . This process consumes 8μA quiescents. Terminations are 20. JK flip flop belongs to 74AC574 family. A voltage of 5V is used to power it. There is 4.5pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AC. This electronic part is mounted in the way of Through Hole. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. 6Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. In order to achieve its superior flexibility, 8 circuits are used. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Optimal efficiency requires a supply voltage of 5V. There are no output lines on the JK flip flop.

MC74AC574NG Features

Tube package
74AC series
20 pins
8 Bits

MC74AC574NG Applications

There are a lot of ON Semiconductor MC74AC574NG Flip Flops applications.

• Safety Clamp
• Frequency Divider circuits
• High Performance Logic for test systems
• Asynchronous counter
• Patented noise
• Consumer
• Pattern generators
• Set-reset capability
• ESD protection
• Event Detectors