MC74ACT273DTR2G Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. The FPGA belongs to the 74ACT series. It should not exceed 200MHzin its output frequency. The list contains 1 elements. It consumes 8μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74ACT273family make up this object. The power supply voltage is 5V. The input capacitance of this JK flip flopis 4.5pF farads. An electronic device belonging to the family ACTcan be found here. A part of the electronic system is mounted in the way of Surface Mount. This board has 20 pins. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 8bits are used in its design. 8 circuits are used to achieve its superior flexibility. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A total of 5V power supplies are needed to run it. In order to ensure high efficiency, the supply voltage should remain at 5V.

MC74ACT273DTR2G Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT273DTR2G Applications

There are a lot of ON Semiconductor MC74ACT273DTR2G Flip Flops applications.

• 2 – Bit synchronous counter
• Control circuits
• Frequency Dividers
• Buffered Clock
• Computers
• Clock pulse
• Bounce elimination switch
• Bus hold
• Supports Live Insertion
• Guaranteed simultaneous switching noise level