MC74ACT374MELG Overview

As a result, it is packaged as 20-SOIC (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74ACT series. In order for it to function properly, its output frequency should not exceed 160MHz. The element count is 1 . As a result, it consumes 8μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. It is a member of the 74ACT374 family. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the ACTfamily. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. Due to its superior flexibility, it uses 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The system runs on a power supply of 5V watts. A total of 2ports are embedded in the D flip flop. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is designed with 3 output lines.

MC74ACT374MELG Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT374MELG Applications

There are a lot of ON Semiconductor MC74ACT374MELG Flip Flops applications.

• Shift Registers
• Patented noise
• Safety Clamp
• ESCC
• Registers
• Divide a clock signal by 2 or 4
• Asynchronous counter
• Circuit Design
• Test & Measurement
• Dynamic threshold performance