SN74LV175APWT Overview

The flip flop is packaged in 16-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74LVseries contain this type of chip. This D flip flop should not have a frequency greater than 165MHz. In total, it contains 1 elements. It consumes 20μA of quiescent Terminations are 16. It is a member of the 74LV175 family. An input voltage of 2.5Vpowers the D latch. JK flip flop input capacitance is 1.4pF farads. In terms of electronic devices, this device belongs to the LV/LV-A/LVX/Hfamily of devices. It is mounted by the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 4 Bits. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. A normal operating voltage (Vsup) should remain above 2V. Due to its superior flexibility, it uses 4 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. There are 3.3V power supplies attached to it. Featuring the maximum design flexibility, it has an output current of 12mA . There are no output lines on the JK flip flop.

SN74LV175APWT Features

Tape & Reel (TR) package
74LV series
16 pins
4 Bits
3.3V power supplies

SN74LV175APWT Applications

There are a lot of Texas Instruments SN74LV175APWT Flip Flops applications.

• EMI reduction circuitry
• High Performance Logic for test systems
• Balanced Propagation Delays
• Modulo – n – counter
• Single Down Count-Control Line
• Communications
• Differential Individual
• Convert a momentary switch to a toggle switch
• Latch-up performance
• Test & Measurement