MC74HC74ADR2G Overview

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 35MHz. Terminations are 14. This D latch belongs to the family of 74HC74. A voltage of 3V provides power to the D latch. The input capacitance of this JK flip flopis 10pF farads. A device of this type belongs to the family of HC/UH. It is mounted in the way of Surface Mount. There are 14pins on it. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. In addition to its maximum design flexibility, the output current of the T flip flop is 5.2mA. To operate, the chip has a total of 1 output lines. It consumes 2μA of quiescent current without being affected by external factors. The number of channels is growing strong/weak: 2.

MC74HC74ADR2G Features

Tape & Reel (TR) package
74HC series
14 pins

MC74HC74ADR2G Applications

There are a lot of ON Semiconductor MC74HC74ADR2G Flip Flops applications.

• Set-reset capability
• Frequency Divider circuits
• Power down protection
• Synchronous counter
• Latch-up performance
• Single Down Count-Control Line
• Buffer registers
• Modulo – n – counter
• Shift Registers
• Digital electronics systems