As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. A 2V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74LCX series. It should not exceed 150MHzin terms of its output frequency. Despite external influences, it consumes 10μAof quiescent current. Terminations are 14. The 74LCX74 family contains it. A voltage of 2.5V provides power to the D latch. A JK flip flop with a 7pFfarad input capacitance is used here. LVC/LCX/Zis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 3.6Vis the maximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is reported that there are 2 channels.
MC74LCX74DR2G Features
Tape & Reel (TR) package 74LCX series 14 pins 3.3V power supplies
MC74LCX74DR2G Applications
There are a lot of ON Semiconductor MC74LCX74DR2G Flip Flops applications.