SN74HC374DBR Overview

20-SSOP (0.209, 5.30mm Width)is the packaging method. The Cut Tape (CT)package contains it. Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 70MHzshould not be exceeded by its output. A total of 1elements are contained within it. It consumes 8μA of quiescent There have been 20 terminations. The 74HC374family includes it. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 3pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. Surface Mount mounts this electronic component. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. In order to achieve its superior flexibility, 8 circuits are used. In view of its reliability, this D flip flop is a good fit for TR. The power supply is 2/6V. The flip flop has 2ports embedded within it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 7.8mA makes it feature maximum design flexibility. 3input lines are available for you to choose from.

SN74HC374DBR Features

Cut Tape (CT) package
74HC series
20 pins
8 Bits
2/6V power supplies

SN74HC374DBR Applications

There are a lot of Texas Instruments SN74HC374DBR Flip Flops applications.

• Dynamic threshold performance
• Guaranteed simultaneous switching noise level
• Communications
• Patented noise
• Circuit Design
• Reduced system switching noise
• ESD performance
• Storage Registers
• Frequency division
• Bounce elimination switch