MC74LVX74DTR2 Overview

14-TSSOP (0.173, 4.40mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. This output is configured with Differential. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~3.6V. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LVXseries FPGA. There should be no greater frequency than 85MHzon its output. This process consumes 2μA quiescents. 14terminations have occurred. JK flip flop belongs to 74LVX74 family. Power is provided by a 2.7V supply. Input capacitance of this device is 4pF farads. An electronic device belonging to the family LV/LV-A/LVX/Hcan be found here. It is mounted by the way of Surface Mount. 14pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. In this case, the maximum supply voltage (Vsup) reaches 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It runs on 3.3Vvolts of power. It has 1 output lines to operate.

MC74LVX74DTR2 Features

Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies

MC74LVX74DTR2 Applications

There are a lot of ON Semiconductor MC74LVX74DTR2 Flip Flops applications.

• Set-reset capability
• EMI reduction circuitry
• Load Control
• ESCC
• Latch-up performance
• Matched Rise and Fall
• Frequency Divider circuits
• Shift registers
• Latch
• Cold spare funcion