SN74HCT273ANSR Overview

In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74HCTseries of FPGAs. You should not exceed 37MHzin the output frequency of the device. There are 1 elements in it. This process consumes 8μA quiescents. The 74HCT273family includes it. This T flip flop has a capacitance of 3pF farads at the input. In this case, the electronic component is mounted in the way of Surface Mount. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. For high efficiency, the supply voltage should be set to 5V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74HCT273ANSR Features

Tape & Reel (TR) package
74HCT series
20 pins

SN74HCT273ANSR Applications

There are a lot of Texas Instruments SN74HCT273ANSR Flip Flops applications.

• Divide a clock signal by 2 or 4
• Control circuits
• Convert a momentary switch to a toggle switch
• Matched Rise and Fall
• Consumer
• 2 – Bit synchronous counter
• Frequency Divider circuits
• Synchronous counter
• Latch
• ATE