SPST - NO 20Ohm DUAL Analog Switches MC74LVXT4066 14 Pins 100nA 3V 14-SOIC (0.209, 5.30mm Width)
SOT-23
MC74LVXT4066M Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-SOIC (0.209, 5.30mm Width)
Number of Pins
14
Operating Temperature
-55°C~85°C TA
Packaging
Tube
JESD-609 Code
e4
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
14
Resistance
30Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
4
Supply Voltage
3V
Terminal Pitch
1.27mm
Reach Compliance Code
unknown
Base Part Number
MC74LVXT4066
Output
SEPARATE OUTPUT
Pin Count
14
Qualification Status
Not Qualified
Operating Supply Voltage
5V
Power Supplies
3.3V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
5.5V
Min Supply Voltage
2V
Operating Supply Current
40μA
Max Supply Current
4μA
Throw Configuration
SPST
Turn On Delay Time
20 ns
Logic Function
Demultiplexer, Multiplexer
Supply Type
Single
Turn-Off Delay Time
30 ns
-3db Bandwidth
160MHz
On-State Resistance (Max)
20Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
37 dB
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
10pF
On-state Resistance Match-Nom
25Ohm
Switch Circuit
SPST - NO
Channel-to-Channel Matching (ΔRon)
10 Ω
Switch-on Time-Max
25ns
Switch-off Time-Max
35ns
Voltage - Supply, Single (V+)
2V~5.5V
Normal Position
NO
Height Seated (Max)
2.05mm
Length
10.2mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
MC74LVXT4066M Product Details
MC74LVXT4066M Overview
Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.209, 5.30mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -55°C~85°C TA. Totally, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. A 3V voltage supply should turn on and run the electronic component. A key feature of the 14 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. Look for analog switch ic variants by searching with MC74LVXT4066. In this multiplexer, the internal resistance is 30Ohm. The datasheets for the 14 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. 40μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 2V~5.5V voltage to drain from a single voltage supply. Put voltage above 4μA on the multiplexer to cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages range from 5V.
MC74LVXT4066M Features
1 Channels Switch Circuit: SPST - NO 40μA Supply Current -3db Bandwidth: 160MHz
MC74LVXT4066M Applications
There are a lot of ON Semiconductor MC74LVXT4066M Analog Switches & Multiplexers ICs applications.
Microprocessor Controlled Analog Systems
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads