MM74HC4051N Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Through Hole is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operation at a temperature around -40°C~85°C TA. The electronic part provides high-quality output because it has 1 channels. A total of 1 circuits make up this switch device. Using the 74HC4051 search parameter, you can discover variants of the switch. It has an internal resistance of 230Ohm. Datasheets for 16 pin functions are available upon request. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analog switch ics with Dual supply type are cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIn the case of dual power supplies, you should connect at least 1V. A 8 input needs to be operated. There are 30MHz bandwidths for data transfer. A temperature above 85°C is not suitable for operation of the analogue multiplexer. A analog switch ics with 1 outputs is included. Suppliers offer a package with 16-PDIP.

MM74HC4051N Features

1 Channels
-3db Bandwidth: 35MHz
Bandwidth: 30MHz

MM74HC4051N Applications

There are a lot of ON Semiconductor MM74HC4051N Analog Switches & Multiplexers ICs applications.

• Medical Instrumentation
• Communication systems
• Medical
• New designs requiring multiplexer functions
• Sample hold systems
• Microprocessor controlled systems
• Relay replacements
• Ultrasound
• Cable PC
• Access Concentrators