150ns, 100ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG405 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)
SOT-23
DG405BDJ-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Number of Pins
16
Weight
1.627801g
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2008
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
55Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
450mW
Technology
CMOS
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
2
Supply Voltage
15V
Reach Compliance Code
unknown
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
DG405
Pin Count
16
Number of Outputs
4
Qualification Status
Not Qualified
Operating Supply Voltage
15V
Number of Channels
2
Max Supply Voltage
36V
Min Supply Voltage
13V
Analog IC - Other Type
DPST
Operating Supply Current
1mA
Power Dissipation
450mW
Max Supply Current
500μA
Throw Configuration
SPST
Turn On Delay Time
150 ns
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
100 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
45Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
On-state Resistance Match-Nom
3Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
150ns, 100ns
Charge Injection
60pC
Crosstalk
-94.8dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height
3.81mm
Length
21.33mm
Width
7.11mm
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
500
$2.82200
$1411
DG405BDJ-E3 Product Details
DG405BDJ-E3 Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. In Through Hole, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. Due to its 2 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with DG405 if you're looking for variants. As far as internal resistance is concerned, it has 55Ohm. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. There should be 13V voltage fed to the electrical part below 13V. This digital switch can be operated with a current of 1mA. A voltage higher than 500μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 22V. A dual power supply should have at least 7V voltage attached. This product is integrated with an analog integrated circuit (IC) of type DPST. The electronic component can function from 15V. This digital multiplexer has 4 outputs.
DG405BDJ-E3 Features
2 Channels Switch Circuit: SPST - NO 1mA Supply Current
DG405BDJ-E3 Applications
There are a lot of Vishay Siliconix DG405BDJ-E3 Analog Switches & Multiplexers ICs applications.
Battery Powered Instruments
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads