NB2309AI1HD Overview

As a clock IC, PLLs is packaged using the Tube method. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible. 16 terminations can be found in frequency generators. The clock generator ic should be grounded with a voltage of 3.3V. This Clock PLL will be fed by Clock as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. The frequency generator has a maximum frequency of 133.33MHz. With the Surface Mount, it is easy to install this electric component on the panel. There is a maximum voltage of 3.6V for this clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. Clock generators should operate with the voltage supply of 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component can be classified as a Zero Delay Buffer. It is a 16-bit IC that is designed for microprocessors specifically. The related electrical components for the base part number NB2309A can be found below. The clock PLL has 16 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. At maximum 0.25 ns, this analog clock generator has low timing skew. The digital clock generator has 8 high-enable output pins.

NB2309AI1HD Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs

NB2309AI1HD Applications

There are a lot of ON Semiconductor NB2309AI1HD Clock Generators applications.

• Signal analyzer
• Infotainment systems
• Carrier synchronization in wired communication
• Medical equipment
• Automatic test equipment
• Fiber Channel
• Digital switching systems
• Phase modulation cellular systems
• Quenching?
• Small signal recovery