NC7SBU3157P6X Overview

As the electronic part is packed in 6-TSSOP, SC-88, SOT-363, international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Total terminations are 6. A high-quality output is provided by the electrical component's 2 channels. A 2.3V voltage supply should turn on and run the electronic component. On the other hand, analog switches can be constructed using SPDT switching circuits. Look for analog switch ic variants by searching with 7SBU3157. As far as internal resistance is concerned, it has 15Ohm. You can find the functions of the 6 pins in the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. Among the inputs that can be operated are the 1 inputs. 250MHz bandwidths enable data to be transferred. Drain to Source resistance for this electronic component is 3Ohm. In this digital multiplexer, there are 2 outputs.

NC7SBU3157P6X Features

2 Channels
Switch Circuit: SPDT
Bandwidth: 250MHz
Drain-to-Source resistance: 3Ohm

NC7SBU3157P6X Applications

There are a lot of ON Semiconductor NC7SBU3157P6X Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Multi-Line E1 Interface Cards
• USB 1.1 signal switching circuits
• PDH Multiplexers
• Remote Powered Equipment
• Multiplexers
• MP3 players
• Frame Relay Equipment
• SONET/SDH ADM
• Cell phones