NCP305LSQ20T1 Overview
A total of 4 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 240. When a supply voltage of 1.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 4 pins are located on this power management. 4 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 1μA. A similar IC managements number of the manufacturer can always be found by using NCP305, the base power ics number.
NCP305LSQ20T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP305LSQ20T1 Applications
There are a lot of ON Semiconductor NCP305LSQ20T1 Voltage Supervisors applications.
- Data storage applications
- Set top box
- Precision measurement
- Cloud computing
- DVR
- Power communication system
- Power distribution systems of operating room
- Embedded computing
- Battery cars
- Refrigeration
