NLVHC4051ADTR2G Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, 16 terminations have occurred. A 8 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. A 1 circuit is present in this switch device. Try searching for the analog switch ic with NLVHC4051A if you are looking for variants. In this multiplexer, the internal resistance is 115Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analog switch ics with Dual, Single supply type are cost-effective. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 40μA current would suffice. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 1V to your dual power supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. From the Automotive, AEC-Q100 series.

NLVHC4051ADTR2G Features

8 Channels
40μA Supply Current
-3db Bandwidth: 80MHz

NLVHC4051ADTR2G Applications

There are a lot of ON Semiconductor NLVHC4051ADTR2G Analog Switches & Multiplexers ICs applications.

• High reliability control systems
• New designs requiring multiplexer functions
• Frame Relay Equipment
• PBX interfaces
• Battery Powered Systems
• Communication systems
• PCMCIA cards
• E1 Network Equipment
• Low-Voltage
• Digital access cross connects