NLVX1G74MUTCG Overview

The flip flop is packaged in a case of 8-UFQFN. You can find it in the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 1.65V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. The Automotive, AEC-Q100series comprises this type of FPGA. You should not exceed 200MHzin the output frequency of the device. The list contains 1 elements. The number of terminations is 8. A voltage of 5V is used to power it. There is 7pF input capacitance for this T flip flop. 1Gis the family of this D flip flop. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. In this case, the maximum supply voltage (Vsup) reaches 5.5V. An electrical current of 3.3V volts is applied to it. It consumes a total of 1μA quiescent current at any given time.

NLVX1G74MUTCG Features

Tape & Reel (TR) package
Automotive, AEC-Q100 series
8 pins
1 Bits
3.3V power supplies

NLVX1G74MUTCG Applications

There are a lot of ON Semiconductor NLVX1G74MUTCG Flip Flops applications.

• Communications
• ESD performance
• Load Control
• ATE
• Automotive
• Clock pulse
• Computers
• Dynamic threshold performance
• Shift registers
• Frequency Dividers