SN74LV374ATPWG4 Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. The 74LVseries comprises this type of FPGA. A frequency of 150MHzshould not be exceeded by its output. The list contains 1 elements. As a result, it consumes 2μA of quiescent current without being affected by external factors. A total of 20terminations have been recorded. The object belongs to the 74LV374 family. Power is provided by a 2.5V supply. JK flip flop input capacitance is 4pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part mounted in the way of Surface Mount. The 20pins are designed into the board. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 8bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 2V for normal operation. Due to its superior flexibility, it uses 8 circuits. The system runs on a power supply of 3.3V watts. The flip flop contains 2ports. This T flip flop features a maximum design flexibility due to its output current of 16mA.
SN74LV374ATPWG4 Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATPWG4 Applications
There are a lot of Texas Instruments SN74LV374ATPWG4 Flip Flops applications.
- Cold spare funcion
- Digital electronics systems
- Automotive
- Pattern generators
- Clock pulse
- Guaranteed simultaneous switching noise level
- Differential Individual
- Matched Rise and Fall
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
