SN74AUC16374GQLR Overview

The package is in the form of 56-VFBGA. D flip flop is included in the Cut Tape (CT)package. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 0.8V~2.7V volts. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74AUC series. Its output frequency should not exceed 250MHz. The element count is 2 . As a result, it consumes 20μA of quiescent current without being affected by external factors. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74AUC16374 family. A voltage of 1.2V is used to power it. A 3pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family AUCcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. There are 56pins on it. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 16bits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. This flip flop has a total of 2ports. In order to operate, the chip has 1 output lines. It is reported that there are 3 input lines.

SN74AUC16374GQLR Features

Cut Tape (CT) package
74AUC series
56 pins
16 Bits

SN74AUC16374GQLR Applications

There are a lot of Texas Instruments SN74AUC16374GQLR Flip Flops applications.

• Data storage
• Balanced 24 mA output drivers
• Reduced system switching noise
• Data transfer
• Digital electronics systems
• 2 – Bit synchronous counter
• Instrumentation
• Computing
• EMI reduction circuitry
• Divide a clock signal by 2 or 4