AD9518-1BCPZ-REEL7 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. Embedded in the 48-VFQFN Exposed Pad, CSP package is this Clock PLL. In it, there are 48 terminations to be found. Basically, this time clock generator needs a voltage of 3.3V. This Clock PLL will be fed by CMOS, LVDS, LVPECL as its input. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.65GHz. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 3.465V as a supply voltage. A maximum voltage of 3.135V should be used for this frequency generator for safety reasons. In terms of supply voltage, RF synthesizer works with 3.135V~3.465V. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. If the ambient temperature is below -40°C, the clock PLL may not start up. This is a clock generator compatible with LVPECL logic levels. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. At 0.22 ns Max, this analog clock generator exhibits low timing skew. A search for the 9518 family will yield similar electronic components.

AD9518-1BCPZ-REEL7 Features

Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V

AD9518-1BCPZ-REEL7 Applications

There are a lot of Rochester Electronics, LLC AD9518-1BCPZ-REEL7 Clock Generators applications.

• Closed circuit systems
• Pagers
• Clock synchronization
• High-speed optical transport network (OTN)
• Signal analyzer
• PMR (Professional Mobile Radio)
• Signal modulation and demodulation
• Carrier synchronization in wired communication
• DVD recorders
• Modems