ADF4110BRU-REEL7 Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 240 when reflowing. As you can see, it consists of 16 terminations. Clock generator ics require a voltage of 3V. In this case, CMOS, TTL is designed to be the input of the clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 550MHz maximum. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. 5.5V would be the maximum supply voltage for this clock generator. This frequency synthesizer requires a supply voltage above 2.7V to be safe. As long as you provide 2.7V~5.5V supply voltage, it will work. The temperature should be set at -40°C~85°C to ensure reliable performance. Clock is designed for clock generator's output. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 16 bits. 6-BIT SWALLOW COUNTER is included in this frequency generator to enhance clock signal output.

ADF4110BRU-REEL7 Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V

ADF4110BRU-REEL7 Applications

There are a lot of Rochester Electronics, LLC ADF4110BRU-REEL7 Clock Generators applications.

• High-frequency induction heating
• Phase modulation cellular systems
• Clock synchronization
• Quenching?
• Simple clock clean-up circuits
• 1 Gigabit Ethernet
• Local oscillators (LOs)
• Cell phones
• Frequency synthesis
• Sampling clocks for ADC and DAC