Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 16 terminations. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 16 pins. A SPST - NC switching circuit is used to build these analog multiplexers. Using the DG411 search parameter, you can discover variants of the switch. An switch multiplexer with 35Ohm internal resistance has a value of 35Ohm. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 13V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 1μA. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. 15V operating voltages are supported by the electronic component. The electrical component supports 4 inputs. There is 25Ohm resistance between the Drain and Source on this part.