DM74AS374N Overview

20-DIP (0.300, 7.62mm)is the way it is packaged. The package Tubecontains it. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to 0°C~70°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74ASseries of FPGAs. There should be no greater frequency than 125MHzon its output. A total of 1elements are present in it. During its operation, it consumes 120mA quiescent energy. There have been 20 terminations. Power is provided by a 5V supply. ASis the family of this D flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. A total of 2ports are embedded in the D flip flop.

DM74AS374N Features

Tube package
74AS series

DM74AS374N Applications

There are a lot of Rochester Electronics, LLC DM74AS374N Flip Flops applications.

• Consumer
• Data transfer
• Shift registers
• High Performance Logic for test systems
• Power down protection
• Automotive
• Parallel data storage
• Buffered Clock
• ATE
• ESCC