MC10E154FNG Overview
In order to save board space, digital switch is located in the 28-LCC (J-Lead).The package is packaged in the manner of Tube.Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±4.2V~5.7V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 10E series multiplexers.As parts of its basic configuration, 28 terminations are desgined.The multiplexer's system works with 5V voltage.A component pin count of 28 is found on this turn signal switch.J BEND is used as the point at which the conductors come to an end as part of this formula.In the 10E family, the logic switch is included.In the signal multiplexer, there are 5 bits available.The minimal supply voltage (Vsup) should be kept at 4.2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.7V to prevent unnecessary failures.Additionally, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V provides improved characteristics.
MC10E154FNG Features
Supplied in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC10E154FNG Applications
There are a lot of Rochester Electronics, LLC MC10E154FNG Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Enabling different functions units in microprocessor instruction decoding
- Electronically controlled engine system
- Memory system of computers
- Automatic health monitoring systems
- Data distribution
- Encrypted communications system
- Control unit of Central Processing unit (CPU)
- Microprocessor input/output systems
- Communication system
