MC74LCX374DWR2 Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74LCX series. This D flip flop should not have a frequency greater than 150MHz. A total of 1 elements are present. It consumes 10μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 3.3V. This JK flip flop has a 7pFfarad input capacitance. LVC/LCX/Zis the family of this D flip flop. Vsup reaches 3.6V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. The D flip flop is embedded with 2ports.

MC74LCX374DWR2 Features

Tape & Reel (TR) package
74LCX series

MC74LCX374DWR2 Applications

There are a lot of Rochester Electronics, LLC MC74LCX374DWR2 Flip Flops applications.

• Set-reset capability
• CMOS Process
• Buffer registers
• Dynamic threshold performance
• High Performance Logic for test systems
• Latch
• Bus hold
• Parallel data storage
• Clock pulse
• Shift registers