NB2308AI1HDR2G Overview

In order to package it as a clock IC, the Tape & Reel (TR) package is used. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains 16 terminations that can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. For full access to the electronic component's capabilities, 1 circuits are implemented. 133.3MHz is the maximal value for normal operation. Because of the Surface Mount, clock PLL can be easily mounted on the panel. This clock generator would require a maximum supply voltage of 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. As long as you provide 3V~3.6V supply voltage, it will work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is an electronic part that can be classified as a Zero Delay Buffer in this case. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The timing skew of this frequency synthesizer is low at 0.2 nsmax. There are 8 pins that are configured to enable high true output on this analog clock generator. You can find similar electronic components by searching for the 2308 family.

NB2308AI1HDR2G Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
8 true outputs

NB2308AI1HDR2G Applications

There are a lot of Rochester Electronics, LLC NB2308AI1HDR2G Clock Generators applications.

• High-speed communication applications
• FM demodulation networks for FM operations
• Ultrasound diagnosis
• PMR (Professional Mobile Radio)
• Signal frequency synthesis circuits
• Broadcast communication
• Reference signals to RF systems
• GPS systems
• Various decoding circuits
• Small signal recovery