SI5335A-B07458-GM Overview

Clock ICs are packaged using the Tray method. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 24 terminations to be found. To operate this time clock generator, 1.8V voltage should be applied. The Surface Mount allows this electrical component to be easily installed on the panel. 1.98V would be the maximum supply voltage for this clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 350MHz. Temperatures below -40°C could result in this clock PLL failing to start up. With ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.

SI5335A-B07458-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B07458-GM Applications

There are a lot of Silicon Labs SI5335A-B07458-GM Clock Generators applications.

• Small signal recovery
• Peripheral devices
• Televisions
• Local oscillators (LOs)
• Microwave radio
• Bluetooth receivers
• Line cards used in telephone exchange
• GPS systems
• Tracking filters
• Aerospace and defense