SI5335B-B06475-GM Overview

Tray-method packaging is used for clock ICs. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains a total of 24 terminations within RF synthesizer. To operate this time clock generator, 1.8V voltage should be applied. Surface Mount-slots make it easy to mount this electronic component on panels. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. This frequency synthesizer requires a supply voltage above 1.71V to be safe. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. For the clock, clock generator's output frequency should not exceed 200MHz. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5335B-B06475-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335B-B06475-GM Applications

There are a lot of Silicon Labs SI5335B-B06475-GM Clock Generators applications.

• Carrier synchronization in wired communication
• GPS systems
• Reference signals to RF systems
• Medical equipment
• Automatic control system test
• Ports
• Satellite navigation communication
• Antenna automatic tracking
• HDD recorders
• Microwave point-to-point systems