SI5335B-B07217-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator is embedded in the 24-VFQFN Exposed Pad package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 24 terminations that can be found in frequency synthesizer. This time clock generator should be voltaged at 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. 1.98V would be the maximum supply voltage for this clock generator. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5335B-B07217-GMR Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335B-B07217-GMR Applications

There are a lot of Silicon Labs SI5335B-B07217-GMR Clock Generators applications.

• Closed circuit systems
• Clock generation systems
• Automatic control system test
• Multi-function printers
• Motor speed controls
• Wide area power system
• Microwave radio
• CB radios
• High-frequency induction heating
• Test and instrumentation equipment