SI5335D-B02738-GMR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 24 terminations in this file. This time clock generator should be voltaged at 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. A clock generating device that produces high-quality clock output frequencies of 200MHz is available for sale. Temperatures below -40°C could result in this clock PLL failing to start up. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY.

SI5335D-B02738-GMR Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335D-B02738-GMR Applications

There are a lot of Silicon Labs SI5335D-B02738-GMR Clock Generators applications.

• GPS systems
• 10 Gigabit Ethernet
• Coherent carrier tracking
• Test and instrumentation equipment
• FPGA and processor clocks
• Integrated phase noise in aerospace systems
• Line cards used in telephone exchange
• Pulsed digital systems
• 1 Gigabit Ethernet
• Laptops