SI5342A-D10336-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. 44 terminations can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 1.8V. The maximal supply voltage (Vsup) reaches 1.89V. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. The clock PLL can synthesi1028MHze a clock frequency of 1028MHz with high quality. If the ambient temperature is below -40°C, the frequency generator may not start.

SI5342A-D10336-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 1028MHz

SI5342A-D10336-GMR Applications

There are a lot of Silicon Labs SI5342A-D10336-GMR Clock Generators applications.

• Signal analyzer
• Phase modulation cellular systems
• Coherent detection of the signal
• Clock signals to the high-speed Digital RF circuits
• Antenna automatic tracking
• Clock generation systems
• Signal frequency synthesis circuits
• Carrier synchronization in wired communication
• CB radios
• Cell phones